home Lan connection problems

Giganews Newsgroups
Subject: home Lan connection problems
Posted by:  Lord Vall
Date: Wed, 14 Dec 2005

My Setup

Comcast Internet ISP / Motorola Surfboard Modem

Hardware Contents:

Primary Router = Linksys BEFSR41 w/ 4 port switch, port 1 connected w/cat5
to computer No.1 using win2k,  port 4 connected w/cat5 (straight thru) to
port 4 on the
Secondary Router = Linksys WRT54GS, port 2 on the 54GS connected w/cat5 to
computer No.2 using win2k, my wireless laptop computer No.3 using XP Home,
connects wirelessly to the 54GS.

The Linksys BEFSR41 is using IP address of 192.168.1.1  w/DHCP enabled.
Computer No.1 is using IP address of 192.168.1.11

The Linksys WRT54GS is using IP address of 192.168.1.2,  DHCP is Disabled.
Computer No. 2 is using IP address of 192.168.1.12

Computer No. 3 is using IP address of 192.168.1.10

This Network is using subnet mask of 255.255.255.0
Default Gateway is 192.168.1.1
DNS Server Addresses are primary 192.168.1.1 & secondary 192.168.1.2
NetBIOS settings = Enable NetBIOS over TCP/IP

I connect to the internet on all computers with no problem, but I can not
connect to the other computers on my network that are all in the same
workgroup.
I can ping all computers on my network.

The win2k Computers No.1 & No.2 do show all computers on the network, but
when I try to connect to one of them I get a error message: //computer No.1
not accessible, The Network Path Not Found.

The XP Home computer No.3 does not show any computers on the network and the
error message reads: Workgroup not accessible, you might not have permission
to use this network resource. Contact the network administrator of this
server to see if you have access permissions. The list of severs for this
network is not currently available.

My question is there anyone that can help me configure these computers so
that I may get access to the other network computers?  I other words “ Help”

Sign;
Ticked

--
rideing the wave

Replies